Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
6
4
Release 6
+CPLS?
+CPLS: <list>
+CME ERROR: <err>
+CPLS=?
+CPLS: (list of supported <list>s)
+CME ERROR: <err>
Description
This command is used to select one PLMN selector with Access Technology list in the SIM card or active application
in the UICC(GSM or USIM), that is used by +CPOL command.
Execute command selects a list in the SIM/USIM. Refer subclause 9.2 for possible <err> values.
Read command returns the selected PLMN selector list from the SIM/USIM
Test command returns the whole index range supported lists by the SIM./USIM
Defined values
<list>:
0
User controlled PLMN selector with Access Technology EF
PLMNwAcT
, if not found in the SIM/UICC then PLMN
preferred list EF
PLMNsel
(this file is only available in SIM card or GSM application selected in UICC)
1 Operator controlled PLMN selector with Access Technology EF
OPLMNwAcT
2 HPLMN selector with Access Technology EF
HPLMNwAcT
Implementation
Optional.
7.21 Read operator names +COPN
Table 2:+COPN action command syntax
Command
Possible response(s)
+COPN
+COPN: <numeric1>,<alpha1>
[<CR><LF>+COPN: <numeric2>,<alpha2>
[...]]
+CME ERROR: <err>
+COPN=?
Description
Execute command returns the list of operator names from the MT. Each operator code <numericn> that has an
alphanumeric equivalent <alphan> in the MT memory shall be returned. Refer subclause 9.2 for possible <err>
values.
Defined values
<numericn>: string type; operator in numeric format (see +COPS)
<alphan>: string type; operator in long alphanumeric format (see +COPS)
Implementation
Optional.