Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
6
3
Release 6
Description
This command is used to edit the PLMN selector with Access Technology lists in the SIM card or active application in
the UICC(GSM or USIM).
Execute command writes an entry in the SIM/USIM list of preferred PLMNs, previously selected by the command
+CPLS. If no list has been previously selected, the User controlled PLMN selector with Access Technology, EF
PLMNwAcT,
is the one accessed by default. If <index> is given but <oper> is left out, entry is deleted. If <oper> is given but
<index> is left out, <oper> is put in the next free location. If only <format> is given, the format of the <oper>
in the read command is changed. The Access Technology selection parameters, <GSM_AcT>, <GSM_Compact_AcT>
and <UTRAN_AcT>, are required when writing User controlled PLMN selector with Access Technology, EF
EF
PLMNwAcT
, Operator controlled PLMN selector with Access Technology EF
OPLMNwAcT
and HPLMN selector with Access
Technology EF
HPLMNwAcT
, see TS 31.102. Refer subclause 9.2 for possible <err> values.
NOTE1: MT may also update the User controlled PLMN selector with Access Technology, EF
PLMNwAcT
,
automatically when new networks are selected.
NOTE2: The Operator controlled PLMN selector with Access Technology EF
OPLMNwAcT
, can only be written if the
write access condition in the SIM/USIM has been previously verified.
Read command returns all used entries from the SIM/USIM list of preferred PLMNs, previously selected by the
command +CPLS, with the Access Technologies for each PLMN in the list.
Test command returns the whole index range supported by the SIM.
Defined values
<indexn>: integer type; the order number of operator in the SIM/USIM preferred operator list
<format>:
0 long format alphanumeric <oper>
1 short format alphanumeric <oper>
2
numeric <oper>
<opern>: string type; <format> indicates if the format is alphanumeric or numeric (see +COPS)
<GSM_AcTn>: GSM access technology:
0 access technology not selected
1 access technology selected
<GSM_Compact_AcTn>: GSM compact access technology:
0 access technology not selected
1 access technology selected
<UTRA_AcTn>: UTRA access technology:
0 access technology not selected
1 access technology selected
Implementation
Optional.
7.20 Selection of preferred PLMN list +CPLS
Table 53:+CPLS parameter command syntax
Command
Possible response(s)
+CPLS=<list>
+CME ERROR: <err>