Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
5
2
Release 6
7.9 Called line identification presentation +CDIP
Table 42: +CDIP parameter command syntax
Command
Possible response(s)
+CDIP=[<n>]
+CDIP?
+CDIP: <n>,<m>
+CDIP=?
+CDIP: (list of supported <n>s)
Description
This command related to a network service that provides "multiple called numbers (called line identifications) service"
to an MT. This command enables a called subscriber to get the called line identification of the called party when
receiving a mobile terminated call. Set command enables or disables the presentation of the called line identifications at
the TE.
When the presentation of the called line identification at the TE is enabled,
+CDIP:<number>,<type>[,<subaddr>,<satype>] response is returned after every RING (or +CRING:
<type>; refer subclause "Cellular result codes +CRC") result code sent from TA to TE. It is manufacturer specific if
this response is used when normal voice call is answered.
Read command gives the status of <n>, and also triggers an interrogation of the provision status of the "multiple called
numbers" service. Test command returns values supported as a compound value.
Defined values
<n> (parameter sets/shows the result code presentation status to the TE):
0
disable
1 enable
<m> (parameter shows the subscriber "multiple called numbers" service status in the network):
0 "multiple called numbers service" is not provisioned
1 "multiple called numbers service" is provisioned
2 unknown (e.g. no network, etc.)
<number>: string type phone number of format specified by <type>
<type>: type of address octet in integer format (refer TS 24.008 [8] subclause 10.5.4.7)
<subaddr>: string type subaddress of format specified by <satype>
<satype>: type of subaddress octet in integer format (refer TS 24.008 [8] subclause 10.5.4.8)
Implementation
Optional.
7.10 Closed user group +CCUG
Table 43: +CCUG parameter command syntax
Command
Possible response(s)
+CCUG=[<n>[,<index>[,<info>]]]
+CCUG?
+CCUG: <n>,<index>,<info>
+CCUG=?
Description