Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
4
0
Release 6
+CSDF=?
+CSDF:(list of supported <mode>s)
[, (list of supported <auxmode>s)]
+CME ERROR: <err>
Description
This command sets the date format via MMI of the date information presented to the user, which is specified by use of
the <mode> parameter. The <mode> affects the date format on the phone display and doesn't affect the date format of
the AT command serial interface. The command also sets the date format of the TE-TA interface, which is specified by
use of the <auxmode> parameter (e.g. the <auxmode> affects the <time> of +CCLK and +CALA). If the parameter is
omitted ("+CSDF =","+CSDF =<mode>","+CSDF=,<auxmode>"),then this sets the default value.
Defined values
<mode>:
NOTE: It is manufacturer specific which modes that are supported.
1 DD-MMM-YYYY
NOTE: Presentation of MMM is language dependent.
2 DD-MM-YY
3 MM/DD/YY
4 DD/MM/YY
5 DD.MM.YY
6 YYMMDD
7 YY-MM-DD
8-255 Manufacturer specific
<auxmode>:
1 yy/MM/dd (default)
2 yyyy/MM/dd
also all other values are reserved by the present document
NOTE: The <time> format of +CCLK and +CALA "yy/MM/dd,hh:mm:ss±zz" when <auxmode>=1 and it is
"yyyy/MM/dd,hh:mm:ss±zz" when <auxmode>=2. If the MT does not support time zone information
then the three last characters may be omitted (see +CCLK command).
Implementation
Optional
6.23 Silence Command +CSIL
Table 30: +CSIL parameter command syntax
Command
Possible response(s)
+CSIL=[<mode>]
+CME ERROR: <err>
+CSIL?
+CSIL:<mode>
+CME ERROR: <err>
+CSIL=?
+CSIL:(list of supported <mode>s)
+CME ERROR: <err>
Description