Specifications

3GPP

3GPP TS 27.007 V6.3.0 (2003-

06)

Release 6

<topRx>: integer type; top value for <wRx> that user is going to request during the next established non-

transparent HSCSD call. Default value 0 indicates that user is not going to change <wAiur>/<wRx> during the

next call. This parameter is not applicable to UTRAN single mode UE.

<codings>: a sum of integers each representing a channel coding that is accepted for non-transparent HSCSD

calls. Default value 0 indicates that all supported codings are accepted (refer +CHSD command for other values).

This parameter is not applicable to UTRAN single mode UE.

Implementation

Mandatory when non-transparent HSCSD implemented.

6.15 HSCSD current call parameters +CHSC

Table 22: +CHSC action command syntax

Command

Possible response(s)

+CHSC

+CHSC: <rx>,<tx>,<aiur>,<coding>

+CHSC=?

Description

Execution command returns information about current HSCSD call. If no HSCSD call is active, all parameters returned

shall equal zero. If HSCSD call is active in UTRAN, all non-applicable parameters returned shall be equal to zero. (It is

manufacturer specific whether non-zero information is returned in case of an active normal single-slot data call.)

Defined values

<rx>: integer type; number of receive timeslots currently in use. This parameter is not applicable in UTRAN.

<tx>: integer type; number of transmit timeslots currently in use. This parameter is not applicable in UTRAN.

<aiur>: integer type; current air interface user rate (in case of transparent service this equals fixed network user

rate) (refer +CHSN command for possible values). For the two-timeslot ECSD bit transparent configuration the

following additional values apply:

8 56000 bps

9 64000 bps

<coding>: current channel coding (refer +CHSD command for possible values). This parameter is not applicable

in UTRAN.

Implementation

Optional.

6.16 HSCSD parameters report +CHSR

Table 23: +CHSR action command syntax

Command

Possible response(s)

+CHSR=[<mode>]

+CHSR?

+CHSR: <mode>

+CHSR=?

+CHSR: (list of supported

<mode>s)