Specifications

3GPP

3GPP TS 27.007 V6.3.0 (2003-

06)

Release 6

5 General commands

ITU-T Recommendation V.250 [14] includes "Generic DCE Control" commands with the prefix +G. These commands

are for the identification of the TA. Four of those commands are adapted here to be the identification commands of the

MT. Syntax is otherwise similar but the prefix is +CG. TIA IS-99 [15] uses same commands for base station

identification.

5.1 Request manufacturer identification +CGMI

Table 2: +CGMI action command syntax

Command

Possible response(s)

+CGMI

+CME ERROR: <err>

+CGMI=?

Description

Execution command causes the TA to return one or more lines of information text <manufacturer>, determined by

the MT manufacturer, which is intended to permit the user of the TA to identify the manufacturer of the MT to which it

is connected to. Typically, the text will consist of a single line containing the name of the manufacturer, but

manufacturers may choose to provide more information if desired. Refer subclause 9.2 for possible <err> values.

Defined values

<manufacturer>: the total number of characters, including line terminators, in the information text shall not

exceed 2048 characters.

Text shall not contain the sequence 0<CR> or OK<CR>

Implementation

Optional.

5.2 Request model identification +CGMM

Table 3: +CGMM action command syntax

Command

Possible response(s)

+CGMM

<model>

+CME ERROR: <err>

+CGMM=?

Description

Execution command causes the TA to return one or more lines of information text <model>, determined by the MT

manufacturer, which is intended to permit the user of the TA to identify the specific model of the MT to which it is

connected to. Typically, the text will consist of a single line containing the name of the product, but manufacturers may

choose to provide more information if desired. Refer to subclause 9.2 for possible <err> values.

Defined values

<model>: the total number of characters, including line terminators, in the information text shall not exceed 2048

characters.

Text shall not contain the sequence 0<CR> or OK<CR>