Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
14
6
Release 6
11.3.2 VBS subscriptions and GId status +CBCS
Table 136: +CBCS action command syntax
Command
Possible response(s)
+CBCS=<GId>,<status>
+CME ERROR: <err>
+CBCS?
+CBCS: <GId>,<status><CR><LF>
[+CBCS: <GId>,<status><CR><LF>
[...]]
+CME ERROR: <err>
+CBCS=?
+CBCS: (list of supported <GId>s),(list of
supported <status>s)
Description
This command works with SIM Card and when the GSM Application is selected in UICC. Function with USIM is for
further study. The set command is used to edit the status of the GId EF
VBSS
on the SIM. The read command returns all
subscribed GIds in EF
VBS
and their status in EF
VBSS
from the SIM.
Defined values
<GId> integer type, group Id as specified in 3GPP TS 22.030 [19]
<status>: integer type, value
0 deactivated
1 activated
Implementation
Mandatory for a MT supporting AT commands only and supporting VBS.
11.4 Informative examples
As supplementary services may be invoked and controlled using dial command according to 3GPP TS 22.030 [19].
An example of voice group call service request usage:
ATD*17*753#500; (originate voice group call with the priority level 3)
OK (voice group call setup was successful)