Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
14
3
Release 6
11.1.8 NCH Support Indication +CANCHEV
Table 132: CAULEV parameter command syntax
Command
Possible Response(s)
+CANCHEV=[<mode>]
+CME ERROR: <err>
+CANCHEV?
+CANCHEV: <status>,<mode>
+CME ERROR: <err>
+CANCHEV=?
+CANCHEV: (list of supported <mode>s)
Description
The set command enables or disables the presentation of unsolicited result response +CANCHEV: <status> from
MT to TE if the status of the network NCH support information changes.
Read command returns in parameter <status> the network NCH support information in the selected cell and the selected
<mode>.
The test command returns values supported as a compound value.
Defined Values
<mode>: status of unsolicited result response presentation
0 disabled (default)
1 enabled
<status>: network NCH support information
0 NCH not available
1 NCH available
Implementation
Optional. Recommended for a MT supporting AT commands only and VGCS or VBS is implemented.
11.1.9 Originator to Dispatcher Information +COTDI
Table 133:+COTDI action command syntax
Command
Possible response(s)
+ COTDI
=<message>[,<OTDIE>[,<message>[,<OTDIE>]
]]
+CME ERROR: <err>
+ COTDI?
[+ COTDI: <message>,<OTDIE>
[,<message>,<OTDIE>]]
+ COTDI=?
+ COTDI: (list of supported
<message>s)
Description
This command allows control of the Originator-to-Dispatcher Information and Compressed Originator-to-Dispatcher
Information according to GSM 44.068[52] and GSM 44.069[53].
When <message> and <OTDIE> are both present the string specified in <OTDIE> is included in the corresponding
group or broadcast control <message> as the value part of the Originator-to-Dispatcher Information Element or
Compressed Originator-to-Dispatcher Information Element (as defined in GSM 44.068[52] and GSM 44.069[53]) into
all subsequent messages of type <message>. If parameter <message> is present but parameter <OTDIE> is not