Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
14
2
Release 6
11.1.7 Voice Group or Voice Broadcast Call State Attribute Presentation
+CACSP
Table 131: CACCS parameter command syntax
Command
Possible Response(s)
+CACSP=[<mode>]
+CME ERROR: <err>
+CACSP?
+CACSP: <mode>[,<da>,<ua>,<comm>,<oi>]
+CME ERROR: <err>
+CACSP=?
+CACSP: (list of supported <mode>s)
Description
The set command enables or disables the presentation of unsolicited result response +CACSP:
<da>,<ua>,<comm>,<oi> from MT to TE if the call control state attributes of the active voice group or voice
broadcast call changes.
Read command returns the current call control state attributes <da>,<ua>,<comm>,<oi> and selected <mode>.
The test command returns values supported as a compound value.
Defined Values
<mode>: status of unsolicited result response presentation
0
disabled (default)
1 enabled
<da>: User connection in the downlink
0 not attached
1 attached
<ua>: User connection in the uplink
0 not attached
1 attached
<comm>: The MT assumes that communication with its peer entity is
0 not enabled in both directions
1 enabled in both directions
<oi>: The MT assumes to be
0 not the originator of the call
1 the originator of the call
Implementation
Optional. Recommended for a MT supporting AT commands only and VGCS or VBS is implemented.