Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
12
8
Release 6
10.1.13 Configure local Octet Stream PAD parameters +CGCLOSP
(Obsolete)
10.1.14 Show PDP address +CGPADDR
Table 116: +CGPADDR action command syntax
Command
Possible response(s)
+CGPADDR=[<c
id> [,<cid>
[,…]]]
+CGPADDR: <cid>,<PDP_addr>
[<CR><LF>+CGPADDR: <cid>,<PDP_addr>
[...]]
+CGPADDR=?
+CGPADDR: (list of defined <cid>s)
Description
The execution command returns a list of PDP addresses for the specified context identifiers.
The test command returns a list of defined <cid>s.
Defined values
<cid>: a numeric parameter which specifies a particular PDP context definition (see the +CGDCONT and
+CGDSCONT commands). If no <cid> is specified, the addresses for all defined contexts are returned.
<PDP_address>: a string that identifies the MT in the address space applicable to the PDP. The address may
be static or dynamic. For a static address, it will be the one set by the +CGDCONT and +CGDSCONT
commands when the context was defined. For a dynamic address it will be the one assigned during the last PDP
context activation that used the context definition referred to by <cid>. <PDP_address> is omitted if none is
available.
Implementation
Optional.
10.1.15 Automatic response to a network request for PDP context activation
+CGAUTO
Table 117: CGAUTO parameter command syntax
Command
Possible response(s)
+CGAUTO=[<n>]
OK
ERROR
+CGAUTO?
+CGAUTO: <n>
+CGAUTO=?
+CGAUTO: (list of supported <n>s)
Description
The set command disables or enables an automatic positive response (auto-answer) to the receipt of a Request PDP
Context Activation message from the network. It also provides control over the use of the V.250 basic commands 'S0',
'A and 'H' for handling network requests for PDP context activation. The setting does not affect the issuing of the
unsolicited result code RING or +CRING.
The test command returns the values of <n> supported by the MT as a compound value.
When the +CGAUTO=0 command is received, the MT shall not perform a PS detach if it is attached. Subsequently,
when the MT announces a network request for PDP context activation by issuing the unsolicited result code RING or
+CRING, the TE may manually accept or reject the request by issuing the +CGANS command or may simply ignore
the network request.