Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
11
5
Release 6
Description
This command allows the TE to specify a Quality of Service Profile that is used when the MT sends an Activate PDP
Context Request message to the network.
The set command specifies a profile for the context identified by the (local) context identification parameter, <cid>.
Since this is the same parameter that is used in the +CGDCONT and +CGDSCONT commands, the +CGQREQ
command is effectively an extension to these commands. The QoS profile consists of a number of parameters, each of
which may be set to a separate value.
A special form of the set command, +CGQREQ= <cid> causes the requested profile for context number <cid> to
become undefined.
The read command returns the current settings for each defined context.
The test command returns values supported as a compound value. If the MT supports several PDP types, the parameter
value ranges for each PDP type are returned on a separate line.
Defined values
<cid>: a numeric parameter which specifies a particular PDP context definition (see the +CGDCONT and
+CGDSCONT commands).
The following parameters are defined in 3GPP TS 23.107 [46]:
<precedence>: a numeric parameter which specifies the precedence class
<delay>: a numeric parameter which specifies the delay class
<reliability>: a numeric parameter which specifies the reliability class
<peak>: a numeric parameter which specifies the peak throughput class
<mean>: a numeric parameter which specifies the mean throughput class
If a value is omitted for a particular class then the value is considered to be unspecified.
Implementation
Optional. If the command is not implemented then all the values are considered to be unspecified.