User`s manual

CBI-tOtO
SCSI Messages·
The SCSI Messages used by CBI-1010 are listed in Table 5-4.
Table 5-4 SCSI Messages
Code Message Name
OOh Command Complete
OIh Extended Message
02h Save Data Pointer
03h Restore Pointer
04h Disconnect
OSh Initiator Detected Error
06h Abort
07h Message Reject
08h No Operation
09h Message Parity Error
80-FFh Identify
SCSI Single-Ended Signals
Figure 5-1 illustrates the pin locations of the CBI-1010 shielded SCSI device
connector.
25
50
26
Figure 5-1: Single-Ended SCSI device connector
Table 5-5 shows the CBI-IOIO shielded single-ended SCSI connector pin
assignments.
NOTE Pin 1 to pin 25 (except pin 13) are connected to ground.
5-4 SCSI Library
Pin 13 is left open. The minus sign next to the signal
indicates active low.