User`s manual

4
Setup
This chapter will assist you in setting up the CBI-IOIO and your system
for use.
On-Board Utility
The CBI-IOIO SCSI host adapter comes with the general purpose RS-232 util-
ity for all DEC
VAXBI systems. The On-Board utility can test the VAXBI slot,
SCSI cable, and SCSI devices connected to the CBI-IOIO. Be sure to complete
utility functions, explained
at the end of this chapter.
Accessing the Utility
To access the RS-232 utility, follow the instructions below.
1 Connect a terminal to the CBI-1010's RS-232 port (DB-25 connector or
DEC compatible RJ-11/Modified Module 423 Jack connector of the back
panel adapter kit).
2 Set the terminal baud rate to 9600 (8-bit data, I-stop bit, no parity).
Setup 4-1