User`s manual
CBI-tOtO
48 Differential Configuration: Install the back panel into
the
back of the
system
with
the
ribbon cable inside the system. If necessary, move the
external connector to the
"SCSI Differential" slot
on
the back panel
by
unscrewing the connector from the "SCSI Single Ended" slot
and
the
plate from
the
"SCSI Differential" slot. Swap the plate
and
the connector
and
screw
them
both back into place. (See Figure 3-7.)
JE
CON1
JE CON2
Ribbon Cable
SCSI Differential Slot
Figure 3-7: Back Panel Cabling (Differential)
4b Single
Ended
Configuration: Install the back panel into the back of the
system
with
the
ribbon cable inside the system. If necessary, move the
external connector to the
"SCSI Single Ended" slot
on
the back panel
by
unscrewing the connector from the "SCSI Differential" slot
and
the
plate
from the
"SCSI Single Ended" slot.
Swap
the
plate
and
the connector
and
screw
them
both
back into place. (See Figure 3-8.)
Installation
3-11