User`s manual

CBI-1010
Table 2-2 describes the conditions of CBI-IOIO when LED's are lit.
Table 2-2 LED Indicators
LED Color
. DS1-Right red
DS1-Left green
DS2-Left green
DS2-Right green
D998/ yellow
D999
Special Features
Indication
Error condition occurred.
Power-up OK and activity indicator. Upon power up, this
LED lights
when the CQD-220 succeeds in the self-
diagnostic testing.
During normal operation, this LED will
blink to show controller activity.
SCSI controller chip Single-ended mode enabled when lit.
Differential
mode enabled with not lit.
Terminator power pin is supplied with power. Refer to
Figure 3-1.
Self-test passed.
The CBI-IOIO supports special features that pertain to the different CBI-IOIO
models as listed Table 2-3.
Table 2-3 Special Feature Support List
Model
Multi-Hosting TMU
CBI-1010/TM Yes Yes
CBI-1010/T Yes Yes
CBI-1010/M Yes No
CBI-1010 1MB Yes No
Multi-Hosting
CBI-IOIO gives you the ability to completely share an array of disks and tapes
between multiple VAX systems running VAX cluster software. CMD's
multi-host solution
can support disk, tape, and optical devices including juke-
boxes. Multi-hosting instructions are given
in Chapter 4, under
II Additional Utilities." Refer to Appendix A for supported disk and tape
devices. Refer to
Chapter 4 for configuration instructions.
Features and Specifications 2-3