Specification Sheet

WATER CONSUMPTION
PER RACK .8 GAL (3.2 L)
PER HOUR 20.4 GAL (64 L)
OPERATING CYCLE
WASH TIME-SEC 100 100
RINSE TIME-SEC 15 15
DWELL-SEC 55
TOTAL CYCLE-SEC 120 120
OPERATING CAPACITY
RACKS PER HOUR 30 30
WATER REQUIREMENTS 140°F (60°C)
WATER CONNECTION (flexible hose) 1/2"I.D.
(supplied)
DRAIN CONNECTION (6 ft. flexible hose) 3/4" I.D.
(supplied)
FLOW PRESSURE (PRV supplied) 18-22 PSI 1.2-1.5 kg/cm
2
CYCLE TEMPERATURES
WASH (minimum) 150°F (66°C)
RINSE (minimum) 180°F (82°C)
FRAME DIMENSIONS
DEPTH 25" (63.5 cm)
WIDTH 24" (60.9 cm)
HEIGHT 33-1/2" (85.1 cm)
MAX HEIGHT CLEARANCE
FOR DISHES 14-1/2" (36.8 cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4"X19-3/4" (50X50CM)
SHIPPING WEIGHT 148# 67KG)
FRONT LEVELING FEET PROVIDED
MOTOR 1HP
HEATERS
WASH TANK HEATER 2kW
BOOSTER HEATER(40°F/22°C rise) 4kW
ELECTRICAL RATING* VOLTS PHASE AMPS
208 1 22
230 1 24
*THIS SYSTEM REQUIRES THREE POWER
WIRES WHICH INCLUDES A CURRENT CARRYING
NEUTRAL. AN ADDITIONAL FOURTH WIRE MUST
BE PROVIDED FOR MACHINE GROUND.
MODEL UC65e USA METRIC
USA METRIC
Specifications:
2
4”
3
3-1/2”
4
0-3/4”
1
4-1/2”
Clearance
2
2”
2
3
1
1
25”
2
0”
1
4”
2
3
1
FRONT VIEW SIDE VIEW
NO. 1 ELECTRICAL LOCATION
NO. 2 HOT WATER SUPPLY LOCATION
NO. 3 DRAIN LOCATION
TOP VIEW
Summary Specifications:
Specified unit will be a CMA model UC65e undercounter high temperature sanitizing dishmachine with built-in boost-
er heater. Features include large 14-1/2" door opening clearance, standard liquid detergent and rinse-aid dispensing
pumps, top, side and rear panels. Unit has standard pump drain, “Safe-T-Temp” feature to ensure proper 180
0
F final
rinse temperature and stainless steel rinse arms with removable end caps for easy cleaning.
H
igh Temp Undercounter
Dishwasher And
Glasswasher
UC65e
115V
115V
208-240V
L1 L2 N
G
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10901.00 © 1-2016 CMA, Inc.
DISHMACHINES
CMA
®
Registered Trademark
MIZER
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
WARNINGS:
• Water hardness above 3 grains per gallon should be treated by a water softener. Failure to provide soft water (3g or less) will void the machine
warranty.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on
CMA Dishmachine products. CMA DOES endorse, and highly recommends, the
standard “tank” style water heaters, sized properly to handle each particular facility
with their water heating requirements.
UC65e SPEC SHEET BACK 11-2013_CMA-44 H spec. Back 12/22/03 1/12/16 10:49 AM Page 1