Owner`s manual

Operatation
• To begi n the wash cy cle pre ss Cycle Start push button. The button light will co me on ,
indicating that the cycle has started.
At the end of the washing cycle, a hot rinse cycle will take place.
The indicator light of the Cycle Start button will turn of
f when the cycle has finished.
• The appli
ance is now ready for a new wash.
• At the end of the day, clea
n the machine (see "Preventive Maintenance").
3.3. Preventive Maintenance.
3.3.1. Regular Maintenance.
In order to ensure perfect performance, the appliance must be completely cleaned at least once a day
in t
he following way:
• T
urn off On-Off push button.
• Turn off
main water valve.
• Rem
ove the overflow tube from the wash tank to empty the water.
Remove the overflow tube, turn off On-Off push button, and
press Drain Pump push button until all the
water has been completely emptied.
• Re
move the filters and clean it with a brush under running water.
• Re
move the spray arms loosening the fixing screws, and thoroughly clean the nozzles and cleaning
and rinsing arms under running water.
• Rea
ssemble all parts and refit the spray arms in their seats, fixing them with the relative screws.
• C
lean the tank thoroughly.
Do not use bleach or chlorine based detergents.
• At the
end of the day, it is advisable to leave the dishwasher door open.
It is advisable to replace the tank
water by refilling the tank at least every 20 wash cycles, or
twice a day. Do not use metal brushes or corrosive products, which can damage the
machine.
3.3.2. Special Maintenance.
Once or twice a year have a qualified technician inspect the machine:
• clean
the solenoid valve filter
•
remove scale from the heating elements
•
check the tightness of the seals
•
check condition and/or wear of the components
•
check operation of the dispensers
MODEL UC50e INSTALLATION & OPERATION MANUAL Rev. 1.00A Page
6