Installation Sheet

EXT WASH
DRAIN
START
POWER
ON
OFF
PRIME
EXT
R/A
10
STEP
9
STEP
UC65e FRONT VIEW
5
STEP
START
POWER
5
EXTENDED
WASH
8
DRAIN
10
7
WASH TEMP
RINSE TEMP
FINAL RINSE
11-2016
7
STEP
UC65e
Quick Setup
Instructions
WARNING: Electrical and
plumbing connections need
to be made by a qualified
service person who will
comply with all available
Federal, State and Local
Health, Electrical, Plumbing
and Safety codes.
6
STEP
EXT WASH
DRAIN
START
POWER
ON
OFF
PRIME
EXT
R/A
EXT WASH
DRAIN
START
POWER
ON
OFF
PRIME
EXT
R/A
EXT WASH
DRAIN
START
POWER
ON
OFF
PRIME
EXT
R/A
EXT WASH
DRAIN
START
POWER
ON
OFF
PRIME
EXT
R/A
DETERGENT
RINSE/PRIME
OVERFLOW
TUBE
Push the power button to turn on the dishmachine.
Wash tank will fill automatically.
The chemical pumps must be primed (using the
prime switch) before the dishmachine is operated .
Push the "START" button to activate the
dishmachine.
With the overflow tube removed, push drain button
to empty dishmachine. Reinstall overflow tube when
drain cycle is complete.
8
STEP
Push the power button (STEP 5) to turn power off.
When draining the dishmachine, remove overflow
tube located inside the wash tank.
9
After filling dishwasher for the first time, (CAUTION:
turn power supply off) reconnect the factory
unplugged wire to booster high-limit switch located
behind front panel.
NOTE: To prevent Heating Element
damage, the UC65e heater must be
filled with water before the heating
element is energized. For this reason
the High Liimit Switch has
intentionally been disconnected
at the factory and will require
re-connection.
6
The Spirit of Excellence
an Ali Group Company