Installation Sheet

ManualsBrandsCMA Dishmachines ManualsDishwasherUC65e

11-2016

STEP

UC65e

Quick Setup

Instructions

ELECTRICAL

INLET

STEP

WARNING: Electrical and

plumbing connections need

to be made by a qualified

service person who will

comply with all available

Federal, State and Local

Health, Electrical, Plumbing

and Safety codes.

LINE 1

LINE 2

NEUTRAL

GROUND

115/208/230V

EXT WASH

DRAIN

START

POWER

OFF

PRIME

EXT

R/A

STEP

Connect the drain hose to wall or floor drain. The

floor drain must have a 1 inch air gap between

drain hose and floor drain.

FLOOR DRAIN

1"AIR GAP

WALL DRAIN

ELECTRICAL CONNECTIONS

LOCATED INSIDE FRONT

PANEL

Level dishmachine by adjusting leveling legs.

Dishmachine must be level front and back to

ensure proper performance.

Connect lines 1 and 2 to electrical block located

inside front panel.

Connect dishmachine to hot water source, minimum

temperature 120F, better results at 140F.

LEVELING

LEGS

1/2" WATER

INLET

3/4" DRAIN

OUTLET

PN: 10130.29

Summary of content (2 pages)

PAGE 1
UC65e Quick Setup Instructions WARNING: Electrical and plumbing connections need to be made by a qualified service person who will comply with all available Federal, State and Local Health, Electrical, Plumbing and Safety codes.
PAGE 2
UC65e Quick Setup Instructions UC65e FRONT VIEW EXT R/A PRIME OFF ON EXT WASH DRAIN START POWER WARNING: Electrical and plumbing connections need to be made by a qualified service person who will comply with all available Federal, State and Local Health, Electrical, Plumbing and Safety codes. EXT R/A OFF ON EXT WASH DRAIN START POWER Push the power button to turn on the dishmachine. Wash tank will fill automatically.