Installation Sheet

Model L-1C
Quick Setup
Instructions
WARNING: Electrical and plumbing
connections need to be made by a
licensed service person and comply
with all Federal, State and Local
Health, Electrical, Plumbing and
Safety codes.
NOTE: WATER AND CHEMICALS TO THIS
DISHWASHER MUST BEPROGRAMMED BY
A QUALIFIED CHEMICAL SPECIALIST.
11-2016
R
POWER
RINSE
START
DETERGENT
SANITIZER
PRIMERS
CYCLE
DRAIN / FILL
5
STEP
Push power switch to “ON” power.
POWER
RINSE
START
DETERGENT
SANITIZER
PRIMERS
CYCLE
DRAIN / FILL
FILL
R
6
STEP
Press and Hold down "SANI", "DETERGENT"and "RINSE"
switches to prime chemicals. This step must be repeated each
time chemical containers are changed.
POWER
RINSE
START
DETERGENT
SANITIZER
PRIMERS
CYCLE
DRAIN / FILL
FILL
R
8
STEP
Close the door, then press start switch.
POWER
RINSE
START
DETERGENT
SANITIZER
PRIMERS
CYCLE
DRAIN / FILL
FILL
R
7
STEP
FILL LINE
Hold down "FILL" Switch for approximately 10 - 15 seconds to allow water to flow into the dishwasher.
Water should reach “FILL LINE” which is located inside at the back of the wash tank. NOTE: The 4th cam
of timer assembly has to be adjusted to maintain the same water level during the cycle.
POWER
RINSE
STAR T
DETERGENT
SANITIZER
PRIMERS
CYCLE
DRAIN / FILL
FILL
R
THERMOMETER
6
SANITIZER
CYCLE LIGHT
POWER
5
DRAIN / FILL
7
START
8
DETERGENT
6
RINSE
6
TIMER
PERISTALTIC
PUMP
TO
OPERATE
MACHINE
SET DELIMER
SWITCH TO
NORMAL
HOT
NEUTRAL
GROUND
DO NOT USE POWER
CORD OR GFI OUTLET.
The Spirit of Excellence
an Ali Group Company
an Ali Group Company