Specification Sheet

OPERATING CAPACITY
(2-1/2") GLASSES PER HOUR 1000 1000
OPERATING TEMPERATURES
INLET WATER. (HOT) RECOMMENDED 140
°F (60°c)
INLET WATER. (COLD) 75
°F (24°C)
WATER CONSUMPTION
HOT WATER (INITIAL FILL) 3 GAL (11.25 L)
HOT WATER PER HOUR (MAX) 12 GAL (45.42 L)
COLD WATER PER MINUTE (APPROX) 2.8 GPM (10.6 LPM)
WATER REQUIREMENTS
HOT WATER INLET 1/2" (1.27cm)
COLD WATER INLET 1/2" (1.27cm)
DRAIN (MAX) 1-1/2" (3.81cm)
DIMENSIONS
DEPTH 25-1/8" (63.8cm)
WIDTH 25-1/4" (64.1cm)
HEIGHT 39"-40-1/2" (99-102.8cm)
MAXIMUM CLEARANCE
FOR GLASSWARE 11-3/4" (29.84cm)
ELECTRICAL RATING VOLTS AMPS
GW-100 120/60/1 14.4
GL-C 208-230/60/1 14.8-14.6
TANK HEATER - GW-100 1.5kW
TANK HEATER - GL-C 3kW
SHIPPING WEIGHT
APPROXIMATE 156# (71kg)
MODEL GW-100 AND MODEL GL-C USA METRIC
USA METRIC
Specifications:
Summary Specifications: Model GW-100 (120V) and Model GL-C (208/230)
The GW-100 and the GL-C glasswashers are designed to produce sparkling clean glassware utilizing separate detergent,
sanitizer and rinse aid chemical pumps. Standard features include upper and lower wash/rinse arms, wash tank heater,
Poly Pro
TM
conveyor, splash curtains, double-walled construction, and storage space for three 1-gallon containers. The GW-
100 and the GL-C are constructed for extended life out of stainless steel.
TOP VIEW
FRONT VIEW
ADJUSTABLE FOOT HEIGHT 1-3/4" (4.5cm)
SIDE VIEW
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10118.50 © 1-2016 CMA, Inc.
25-1/4"
25-1/8"
1
2-1/2"
2-1/4"
6
"
HOT WATER
COLD
WATE R
DRAIN
6"
13"
DRAIN
19-1/2"
3
0-1/2"
6"
13"
12-1/2"
HOT
WATE R
11-3/4" INTERIOR CHAMBER
VERTICAL CLEARANCE
FOR GLASSES
DRAIN
25-1/4"
40-1/2"
39"
40-1/2"
3
9"
6"
5-1/2"
5-1/2"
HOT
WATE R
COLD
WATE R
Chemical Sanitizing
Undercounter Glasswasher
GW-100
GL-C
208/230V
120V
DISHMACHINES
®
CMA
Registered Trademark
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
WARNINGS:
• Water hardness above 3 grains per gallon should be treated by a water softener. Failure to provide soft water (3g or less) will void the machine
warranty.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on
CMA Dishmachine products. CMA DOES endorse, and highly recommends, the
standard “tank” style water heaters, sized properly to handle each particular facility
with their water heating requirements.
GW-100 SPEC SHEET BACK 4-6-2015 / REV 1-2016_G-LX Spec Back 1/8/16 2:12 PM Page 1