Owner's Manual
Table Of Contents
- SPECIFICATIONS
- GETTING STARTED
- OPERATION
- WET SCRAPING
- HAND SCRAPING
- CLEAN SCREEN
- REMOVE SCREEN
- RE-INSTALL WASH ARM
- CLEAN WASH ARM
- REMOVE WASH ARM
- EMPTY SCRAP TRAY
- ADDENDUM FOR MACHINES INSTALLED IN THE CITY OF CHICAGO
- ELECTRICAL DIAGRAM
Title
Installation & Operation
Rev 1.02A
Model EAH / EC Dishwasher
02/07/11
Page 12
3. Check Operations
Operate the machine for one cycle. Watch detergent, sanitizer and rinse additive “delivery tubes” at the
point where they inject chemical into the machine. Remember: red tube – detergent; blue tube-rinse; and
clear white tube-sanitizer. Check temperature at the end of the cycle for 120
°
F minimum.
4. Cleanup
Wipe down the machine and check the chemical level in the containers. Also inspect machine
for leaks or other items that might cause trouble during a rush period. You are now ready to wash
dishes.
Remember: The chemical containers should be saved for pickup by the serviceman during his regular
call. Do not throw them in the trash bin.
5. Empty the Scrap Tray
Remove scrap tray drawer and thoroughly rinse out. Clean tray after each meal, or once every hour if
very busy.
EMPTY SCRAP TRAY