Owner`s manual

MODEL GL-X INSTALLATION & OPERATION MANUAL Rev. 1.01B PAGE

1.2. GLX Operational Cycle

The GLX Operational Cycle has a total cycle time of 2 minutes (120 seconds). The

Timing Diagram and the steps listed below detail the individual functions that are

executed during each Operational Cycle.

Seconds: 0 10 20 30 40 50 60 70 80 90 100 110 120

1. With the machine powered up, toggling the START switch begins a cycle.

a) Toggling the START switch energizes both the cam timer motor and the instant

start relay. The instant start relay latches ON the power to the cam timer motor so

that the START switch can be released a moment after it has been toggled without

the cam timer motor losing power.

b) After about 2 seconds, Cam 1—the Start cam—latches ON the power to the cam

timer motor and drops out the instant start relay. The cam timer motor continues

FILL

Start/Stop

Detergent

Drain

Flush/Fill

Sanitizer

Rinse

Pump Motor

Heater

WASH

RINSE

Instant

Start Relay

Cam 1

Cam 2

Cam 3

Cam 4

Cam 5

Cam 6

Cam 7

Cam 8