Specification Sheet

I
nside Tank
Dimension
25-1/8"
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841 •800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
P/N: 10113.20 © 3-2018 CMA, Inc.
AUTOFI L
POWER
O
FF- ON
C
YCLE
1
. CLOSE DRAIN.
2. TURN ON POWER.
4. CLOSE
D
OORS TO
START CYCLE.
5. WHEN
C
YCLE IS
FINISHED
(Cycle light out)
O
PEN DOORS
AND REMOVE
R
ACKS.
3. PUSH TO ACTIVAT
E
AUTO FILL.
OPERATING
INSTRUCTIONS
L
CMA-180-VL
CMA-180-VL
WATER CONSUMPTION
PER RACK (MAX) .89 GAL (3.37 L)
PER HOUR 52 GPH (197 L)
OPERATING CYCLE
WASH TIME - SEC. 49 49
RINSE TIME - SEC. 12 12
STEAM EVACUATION 41 41
TOTAL CYCLE 90 90
OPERATING CAPACITY
RACKS PER HOUR 40 40
WASH TANK CAPACITY 8 GAL. (30.3 L)
PUMP CAPACITY 52 GPM (197 LPM)
WATER REQUIREMENTS
COLD WATER 41-65°F (5°C-18°C)
HOT WATER 120°F -140°F (49°C - 60°C
DRAIN CONNECTION 2" (5.1cm)
RINSE PRESSURE SET 20 5psi (1.41 kg/cm
2
)
HOT WATER INLET 1/2" (1.3cm)
COLD WATER INLET 1/2" (1.3cm)
OPERATING TEMPERATURE
WASH-
0
F (MIN) 155°F-160°F (68°C-71°C)
RINSE-
0
F (MIN) 180°F-195°F (82°C-90°C)
WASH PUMP MOTOR HP 11
DIMENSIONS
DEPTH 29" (76.7cm)
WIDTH (OUTSIDE DIMENSION) 25 -1/2" (65cm)
HEIGHT 95-5/16"-96-5/16" (242-244.6cm)
STANDARD TABLE HEIGHT 34" (86.3cm)
MAX CLEARANCE FOR DISHES 28" (71.1cm)
DRAIN CONNECTION (OFF FLOOR) 11-1/2"-12-1/2" (29-32cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4" X 19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS PHASE AMPS
208 1 78
240 1 88
208 3 49
240 3 55
480 3 25
APPROXIMATE SHIPPING WEIGHT
625# (238kg)
SHIPPING DIMENSIONS
PALLET & WOODEN CRATE @ 45" X 46" X 96"
MODEL CMA-180-VL USA METRIC
USA METRIC
Specifications:
Front
View
Top View
Corner
95-5/16"
96-5/16"
Adj.
23"
29"
25-1/2"
9-3/4"
20-1/2"
11-1/2"
Drain
15-1/4"
Cold Water
Inlet
Left
View
26-5/16"
69"
70"
Adj.
5"
5" Min
Summary Specifications: Model CMA-180-VL TALL
The model CMA-180-VL TALL single tank, high temperature dishwasher is designed for years of trouble free service, producing sparkling results
while conserving energy, water and chemicals. This machine is supplied with a built-in 12 kW booster heater required for “Ventless” feature to func-
tion. The CMA-180-VL TALL comes standard with the 3-door feature for straight or corner applications. Unique soil purging system filters wash water
and plate debris into an external tray. The CMA-180-VL TALL is NSF, UL, CUL and CE approved. Constructed entirely of stainless steel.
12"
Minimum
Clearance
INCLUDES
REQUIRED 12kW
BOOSTER
Dish
Clearance
28"
Ceiling
+
CMA TABLE DIMENSION
2 3/4"
1-1/4"MAX. 3/16"
MIN.
21"
6"
MIN.
2
5 - 3/ 8
2
High Temperature
3
- Door Single Rack
Dishwasher
CMA-180-VL TALL
DISHMACHINES
Top View
Straight
23"
29"
25-1/2"
7"
4-1/2"
1-1/2"
Min
3
-1/2"
9-3/4"
Hot Water Inlet
3-1/8"
O
ff The Top
Electrical Hook Up
4-1/4" Off The Top
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC
CMA
®
Registered Trademark
MIZER
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
WARNINGS:
• CMA recommends utilizing a water softening system to maintain water hardness measurements of 3.5 gpg (grains per gallon) or less. This will
assure maximum results and optimum operation of the dishmachine.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on CMA
Dishmachine products. CMA DOES endorse, and highly recommends, the standard “tank” style
water heaters, sized properly to handle each particular facility with their water heating requirements.
CMA-180-VL TALL BACK 12-2016 - rev 10-19-2017 REV 3-21-2018_180 Spec Sheet Back 3/21/18 11:39 AM Page 1