Specification Sheet

WATER CONSUMPTION
PER RACK 1.24 GAL. (4.65 L)
PER HOUR 74.4 GPH (281.2 L)
OPERATING CYCLE
WASH TIME - SEC. 44 44
RINSE TIME - SEC. 11 11
TOTAL CYCLE 55 55
OPERATING CAPACITY
RACKS PER HOUR 60 60
WASH TANK CAPACITY 8 GAL. (30.3 L)
PUMP CAPACITY 68 GPM (257 LPM)
WATER REQUIREMENTS
WITHOUT BOOSTER HEATER 180°F (82°C)
WITH BOOSTER HEATER 120°F -140°F (49°C - 60°C
WATER INLET 3/4" (1.9 cm)
DRAIN CONNECTION 2" (5.1cm)
RINSE PRESSURE SET 20 5psi (1.41 kg/cm
2
)
OPERATING TEMPERATURE
WASH-
0
F (MIN) 155°F-160°F (68°C-71°C)
RINSE-
0
F (MIN) 180°F-195°F (82°C-90°C)
WASH PUMP MOTOR HP 11
FRAME DIMENSIONS
DEPTH 25" (63.5cm)
WIDTH (OUTSIDE DIMISION) 25-1/2" (65cm)
HEIGHT 69"-70" (175-178cm)
STANDARD TABLE HEIGHT 34" (86.3cm)
MAX CLEARANCE FOR DISHES 27" (68.6cm)
DRAIN CONNECTION (OFF FLOOR) 11-1/2"-12-1/2" (29-32cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4" X 19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS PHASE AMPS
WITHOUT BOOSTER 208 1 36
240 1 38
208 3 24
240 3 26
480 3 10
WITH BOOSTER 208 1 78
240 1 88
208 3 49
240 3 55
480 3 25
SHIPPING WEIGHT
WITHOUT BOOSTER 353# (160kg)
WITH BOOSTER 396# (180kg)
MODEL CMA-180T SPLIT DOOR USA METRIC
USA METRIC
Specifications:
Front View
Left View
69"
70"
Adj.
Summary Specifications: Model CMA-180T Split Door
The model CMA-180T Split Door single tank, high temperature dishwasher is designed for years of trouble free service, producing sparkling
results while conserving energy, water and chemicals. This machine is available with an optional “built in” booster heater, assuring a con-
tinuous supply of 180°F hot water, and can accommodate dishes and utensils up to 27" high. Constructed entirely of stainless steel.
Unique soil purging system filters wash water and plate debris into an external tray. The CMA-180T Split Door meets NSF, UL, CUL stan-
dards.
13-1/2"
92-1/2"
93-1/2"
Adj.
20-1/2"
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10409.00 © 1-2016 CMA, Inc.
Available Models:
n CMA-180TS Tall Straight Split Door n CMA-180TSB Tall Straight Split Door with booster
n CMA-180TC Tall Corner Split Door n CMA-180TCB Tall Corner Split Door with booster
High Temperature
Pot & Pan Single Rack
Split Door Dishwasher
CMA-180T
11-1/2"
Drain
+
Max
Clearance
For
Dishes
27"
25-1/8"
Inside Tank
Dimension
CMA TABLE DIMENSION
2 3/4"
1-1/4"MAX. 3/16"
MIN.
21"
6"
MIN.
2 5 - 3/ 8
2
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC
DISHMACHINES
CMA
®
Registered Trademark
MIZER
Top View
180C
Top View
180S
23"
25"
25-1/2"
2-1/2"
4-1/2"
23"
25"
25-1/2"
9-3/4"
5" Min
5" Min
9-3/4"
Water Inlet 3"
Off The Top
Electrical Hook Up
4-1/4" Off The Top
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
WARNINGS:
• Water hardness above 3 grains per gallon should be treated by a water softener. Failure to provide soft water (3g or less) will void the machine
warranty.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on
CMA Dishmachine products. CMA DOES endorse, and highly recommends, the
standard “tank” style water heaters, sized properly to handle each particular facility
with their water heating requirements.
180T Spec Sheet Split Door Back 9-2015/REV 1-2016_180T Spec Sheet Back 1/21/16 2:53 PM Page 1