Specification Sheet

25-1/8"
I
nside Tank
D
imension
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841 •800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10113.00 © 1-2016 CMA, Inc.
DISHMACHINES
WATER CONSUMPTION
PER RACK .82 GAL (3.1 L)
PER HOUR 47 GAL (177 L)
OPERATING CYCLE
WASH TIME - SEC. 42 42
RINSE TIME - SEC. 12 12
DWELL TIME - SEC. 44
TOTAL CYCLE 58 58
OPERATING CAPACITY
RACKS PER HOUR 60 60
WASH TANK CAPACITY 8 GAL. (30.3 L)
PUMP CAPACITY 52 GPM (197 LPM)
WATER REQUIREMENTS
WITHOUT BOOSTER HEATER 180°F (82°C)
WITH BOOSTER HEATER 120°F -140°F (49°C - 60°C
WATER INLET 3/4" (1.9cm)
DRAIN CONNECTION 2" (5.1cm)
RINSE PRESSURE SET 20 5psi (1.41 kg/cm
2
)
OPERATING TEMPERATURE
WASH-
0
F (MIN) 155°F-160°F (68°C-71°C)
RINSE-
0
F (MIN) 180°F-195°F (82°C-90°C)
WASH PUMP MOTOR HP 11
DIMENSIONS
DEPTH 25" (63.5cm)
WIDTH (OUTSIDE DIMENSION) 25 -1/2" (65cm)
HEIGHT 59"-60" (150-152cm)
STANDARD TABLE HEIGHT 34" (86.3cm)
MAX CLEARANCE FOR DISHES 17-1/2" (44cm)
DRAIN CONNECTION (OFF FLOOR) 11-1/2"-12-1/2" (29-32cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4" X 19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS PHASE AMPS
WITHOUT BOOSTER 208 1 36
240 1 38
208 3 24
240 3 26
480 3 10
WITH BOOSTER 208 1 78
240 1 88
208 3 49
240 3 55
480 3 25
APPROXIMATE SHIPPING WEIGHT
WITHOUT BOOSTER 338# (151kg)
WITH BOOSTER 351# (170kg)
MODEL CMA-180 USA METRIC
USA METRIC
Specifications:
F
ront View
Top View
180C
Top View
180S
79"
80"
Adj.
23"
25"
25-1/2"
2-1/2"
4-1/2"
23"
25"
25-1/2"
9-3/4"
20-1/2"
11-1/2"
Drain
Left View
13-1/2"
Max Clearance
For Dishes
17-1/2"
59"
60"
Adj.
5" Min
5"
5" Min
Summary Specifications: Model CMA-180
The model CMA-180 single tank, high temperature dishwasher is designed for years of trouble free service, producing sparkling results
while conserving energy, water and chemicals. This machine is available with an optional “built in” booster heater, assuring a continuous
supply of 180°F hot water, and is easily field convertible for either corner or straight installation. Unique soil purging system filters wash
water and plate debris into an external tray. The CMA-180 is NSF, UL, CUL approved. Constructed entirely of stainless steel.
Available Models
n CMA-180S Straight
n CMA-180SB Straight with booster
n CMA-180C Corner
n CMA-180CB Corner with booster
9-3/4"
Water Inlet 3"
Off The Top
Electrical Hook Up
4-1/4" Off The Top
+
CMA TABLE DIMENSION
2 3/4"
1-1/4"MAX. 3/16"
MIN.
21"
6"
MIN.
2 5 - 3/ 8
2
High Temperature
Straight or Corner Single
Rack Dishwasher
CMA-180
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC
CMA
®
Registered Trademark
MIZER
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
WARNINGS:
• Water hardness above 3 grains per gallon should be treated by a water softener. Failure to provide soft water (3g or less) will void the machine
warranty.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on
CMA Dishmachine products. CMA DOES endorse, and highly recommends, the
standard “tank” style water heaters, sized properly to handle each particular facility
with their water heating requirements.
180 SPEC SHEET BACK 1-2014_180 Spec Sheet Back 1/21/16 2:24 PM Page 1