AH.SpecSheet
Summary Specifications: Model AH/C
CMA Energy Mizer model AH and model C low temperature, chemical sanitizing commercial dishwashers meet NSF, UL and con-
struction standards WITHOUT the use of BOOSTER or TANK HEATERS. The models AH and C are constructed entirely of stain-
less steel. Each unit automatically washes, rinses and sanitizes food service utensils in standard 19-3/4" x 19-3/4" racks. Unit comes
standard with upper and lower stainless steel wash arms. The model AH and model C incorporate a pump purging system that
improves results by eliminating soil and chemical carryover during rinse cycle. Note: These machines do not have built-in
heaters, therefore produce no steam.
MODEL AH/C USA METRIC
OPERATING CAPACITY
RACKS PER HOUR
(NSF RATED) 40 40
OPERATING CYCLE
WASH TIME-SEC 45 45
RINSE TIME-SEC 30 30
DWELL TIME-SEC 15 15
TOTAL CYCLE TIME 90 90
WASH TANK CAPACITY 1.7 GAL. (6.45 L)
PUMP CAPACITY 52 GPM (197 LPM)
OPERATING TEMPERATURE
REQUIRED 120°F (49°C)
RECOMMENDED 140°F (60°C)
WATER CONSUMPTION
PER RACK 1.7 GAL. (6.45 L)
PER HOUR 74 GPH (280 LPH)
WATER REQUIREMENTS
WATER INLET 3/4" (1.9cm)
DRAIN-I.P.S. 2" (5.1cm)
Specifications:
WASH PUMP MOTORS HP 11
DIMENSIONS
DEPTH 25-3/4" (65.4cm)
WIDTH (OUTSIDE DIMENSION) 25-3/4" (65.4cm)
HEIGHT 56"-57" (142.2cm-144.8cm)
STANDARD
TABLE HEIGHT 34" (86cm)
MAXIMUM CLEARANCE
FOR DISHES 17" (43cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4"X19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS AMPS
115 16
SHIPPING WEIGHT
APPROXIMATE 270# (122.5kg)
USA METRIC
11-1/2" Adj. 12-1/2" Scrap
Tray Drain Facing Floor
56"
Adj.
57"
74"
Counter
Top
34"
Adj.
35"
1-1/2"
Cleanout
FRONT VIEW
25-1/8"
Inside Tank
Dimension
RIGHT VIEW
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 2015 CMA, Inc.
Door Opening 20-1/2"
DISHMACHINES
8-1/2"
Drain
WARNING: Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health,
Plumbing and Safety codes.
CMA TABLE DIMENSION
2 3/4"
1-1/4"MAX. 3/16"
MIN.
21"
6"
MIN.
25 - 3/ 8
5" Min.
6-1/2"
25-3/4"
25-3/4"
12"
3"
AH TOP VIEW
Water Inlet 3"
Off The top
Electrical
Hook Up
3" Off
The top
Water Inlet
3" Off
The top
Electrical
Hook Up
3" Off
The top
25-3/4"
25-3/4"
5" Min.
5" Min.
CORNER TOP VIEW
AH/C
Chemical Sanitizing
Single Rack Straight/Corner
Dishwashers
Max Clearance
For Dishes 17"
25-1/4"
25-1/4"
Inside Corner
Tank Dimensions
CMA
®
Registered Trademark
MIZER
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC