User Manual

P/N: 192047082 (REV AA) 627NH January 2018

Figure 1. Chain Container

Figure 2. Latchlok Hook

Figure 3. Series 635 Low Headroom Trolley

Figure 4. Series 635 Motor Driven Trolley

Figure 5. UT Trolley

Figure 6. CM® Rocket™ Universal Pendant Control

ACCESSORIES

HOOK SUSPENSIONS

Swivel and rigid type hook suspensions are available

for all Lodestar Electric Hoists. However, rigid type

hook suspensions are normally recommended for most

application. The hook suspensions are intended for

suspending the hoist from a trolley which has a single

load bar (such as CM

Series 632 and 633 Trolleys) or

for suspending the hoist from a xed structure.

CHAIN CONTAINER

This accessory (see Figure 1) is used to hold slack chain

and it is supplied complete with mounting hardware and

instructions. The chain container is recommended for those

applications where the slack chain would interfere with the

load or drag on the oor as may be the case with double or

triple reeved units. Chain containers can be furnished for

units already in use.

LATCHLOK

HOOKS

CM Latchlok hooks (see Figure 2) are available to replace

the standard upper and lower hooks used on the Lodestar

Electric Hoists.