User Manual

P/N: 192047082 (REV AA) 627NH January 2018
26
MONITOR PARAMETERS
Parameter Code Name Function Units
Maintenance
U04.09 LED Check
Lights all segments of the LED to verify
that the display is working properly
U04.10 kWh: Lower 4 Digits --
U04.11 kWh: Upper 5 Digits --
U04.12 CPU Resources Used --
U04.13 Peak Hold Current --
U04.14 Peak Hold Output Frequency --
U04.16 Motor Overload (oL1) Detection Level --
U04.17 Motor Overload (oL2) Detection Level --
U04.18 Frequency Reference Source Selection --
U04.19 Frequency Reference Memobus --
U04.20 Output Frequency Reference (decimal) --
U04.21 Run Command Selection Results --
U04.22 Memobus Communication Reference --
U04.23 Not Used --
Motor Control Monitor
U06.01 Motor Secondary Current (lq) %
U06.02 Motor Excitation Current (ld) %
U06.03 ASR Input %
U06.04 ASR Output %
U06.05 Output Voltage Reference (Vq) %
U06.06 Output Voltage Reference (Vd) %
U06.07 ACR (q) Output %
U06.08 ACR (d) Output %
U06.20 Frequency Reference Bias (Up/Down2) %
U06.21 Offset Frequency %
U06.36 GAIA Communication Error --
U06.37 LUNA Communication Error --
U06.38 Option Card Error --