User's Manual

A-B Repeat Playback

1. You can use the MODE button to repeatedly play a certain section of the currently playing MP3 file

or voice message.

2. During playback, press the MODE button at the start point of the section you want to repeat (this

will be indicated as "A↔" on the LCD) and press the MODE button again at the end point (this will be

indicated as "A↔B" on the LCD). Repeat playback of the A-B section will start.

3. To cancel A-B Repeat Playback, press the MODE button once again.

Note

To switch from Pause mode to Stop mode, press the ◀◀ or ▶▶ button.

Equalizer (EQ) Feature

1. While in Stop mode, press the MODE button for over 3 seconds to switch to Equalizer mode.

2. "EQ" will be displayed on the LCD. Press the MODE button again, and then press the ▶▶ button

to change the EQ setting. Each time you press the ▶▶ button, the EQ setting switches as follows:

ROCK Æ POP Æ CLASSIC Æ JAZZ Æ NORMAL

3. To return to beginning, press the MODE button, enter the EQ mode, press the ▶▶ button to select

"EXIT", and then press the MODE button again.

4. If no button is pressed for 5 seconds while in a mode, you will be taken to the menu immediately

before the current one.

Repeat Playback

1. While in Stop mode, press the MODE button for over 3 seconds to switch to Equalizer mode.

2. Press the ▶▶ button to select RPT.

3. "RPT(REPEAT)" will be displayed on the LCD. Press the MODE button again, and then press the

▶▶ button to change the repeat setting. Each time you press the ▶▶ button, the repeat setting

switches as follows: RANDOM Æ RPT-1 Æ RPT-ALL Æ NORMAL

4. To return to beginning, press the MODE button, enter the RPT mode, press the ▶▶ button to

select "EXIT", and then press the MODE button again.

Adjusting LCD Contrast

1. While in Stop mode, press the MODE button for over 3 seconds to switch to Equalizer mode.

2. Press the ▶▶ button to select CONTRAST.

3. "CONTRAST" will be displayed on the LCD. Press the MODE button once again, and then press the

◀◀ or ▶▶ button to adjust the contrast level of the LCD.

4. To return to beginning, press the MODE button, enter the Contrast mode, press the ▶▶ button to

select "EXIT", and then press the MODE button again.

Note

The LCD of this device has a built-in EL backlight. The EL backlight will come on as soon as you

press a button and will automatically go off after 5 seconds.