User's Manual

· Power is not on.
· It stops in an initial
state.
· Used space is displayed
while there is no file
stored.
· Other errors of the
product.
· Check the polarity of the battery.
· Check the remained capacity of the battery.
· Remove the battery from the product, connect
the product to a PC using a USB cable and power
it on. When you power the product on, ‘READY’
sign will appear on the LCD.
· In this status, refer to the Formatting
Procedure of this manual.
· If it stops in an initial state and the
problem is not solved by formatting, please start
'Live Music_K Update'.
· Although the product is
connected to a PC, the
removable disk is not
generated.
· Remove the battery from the product and
reinsert it.
· Check if SCSI Host Controller is listed in the
Device controller. (Device controller: My
computer
→ System Information → Hardware → Device
Controller)
· If it is not caught normally as below, click
the right button of the mouse to delete it.
(In case of Window 98 / 98SE)
[fig-e37]
(In case of ME / 2000PRO / XP)
[fig-e38]
· After deletion, click 'hardware change search'
icon in the upper end to newly install the
device.
· When it is normally installed, the yellow
exclamation mark in the front will disappear.
· If there isn’t any new
hardware detected
· Check 'Control Board → System (System
Registration Information)
→ Device Controller and
see if there is ‘USB Controller (General Series
Bus Controller, Universal Series Bus Controller).