User's Manual

computer → System Information → Hardware → Device
Controller)
· If it is not caught normally as below, click
the right button of the mouse to delete it.
(In case of Window 98 / 98SE)
[fig-e37]
(In case of ME / 2000PRO / XP)
[fig-e38]
· After deletion, click 'hardware change search'
icon in the upper end to newly install the
device.
· When it is normally installed, the yellow
exclamation mark in the front will disappear.
· If there isn’t any new
hardware detected
· Check 'Control Board → System (System
Registration Information)
→ Device Controller and
see if there is ‘USB Controller (General Series
Bus Controller, Universal Series Bus Controller).
· If you do not have the above devices in your
PC, you cannot use a USB port. In this case, you
have to so set the bios (CMOS) environment that
you can use a USB port.
· Contact the sales agent for a detailed setting
method.