User's Manual

7. If there are more than 20 folder in ‘Removable Disc’, it may take longer than normal to
turn on the unit.
◎ Hold Function (HOLD)
1. This function is used to keep other functions from working while the product is running.
2. Push the 'HOLD' switch at the bottom of the product to the arrow direction and the other
key function will not work.
3. At this state, the 'Lock Mark will be displayed at LCD panel. To escape, return the HOLD
switch to the other side.
◎ Troubleshooting Tips
· Please check the followings first if the product does not work properly.
Problems Solution
· The buttons of the
product do not work.
· Check if the 'HOLD' switch on the lower end of
the product is locked.
· Turn the 'HOLD' switch to the original
direction.
· The music file is not
played.
· Check if the extension is 'MP3' or 'WMA'.
· This product can play only the 'MP3' and 'WMA'
files.
· Power is not on.
· It stops in an initial
state.
· Used space is displayed
while there is no file
stored.
· Other errors of the
product.
· Check the polarity of the battery.
· Check the remained capacity of the battery.
· Remove the battery from the product, connect
the product to a PC using a USB cable and power
it on. When you power the product on, ‘READY’
sign will appear on the LCD.
· In this status, refer to the Formatting
Procedure of this manual.
· If it stops in an initial state and the
problem is not solved by formatting, please start
'Live Music_K Update'.
· Although the product is
connected to a PC, the
removable disk is not
generated.
· Remove the battery from the product and
reinsert it.
· Check if SCSI Host Controller is listed in the
Device controller. (Device controller: My