Service manual

Troubleshooting
5-9
System Startup
When the unit is first powered ON, the following three-window system startup screen is displayed.
Figure 5-1: System Startup window
01030E03 “NVRAM read/write memory test failed” Replace CPU board.
01030F00 “Wireless card diagnostic failed” Replace CPU board.
01031000 “EPP diagnostic failed” Replace CPU board.
Table 1: Diagnostic Failure Messages (continued)
Error Code Diagnostics Failure Message Suggested Action
This window displays basic system configuration
This window displays any diagnostic
failures and other system errors
during the boot process.
This window is reserved for future use.
and booting status during the boot process.
The Boot menu and Diagnostics menus are also shown here.