Service manual

Troubleshooting
5-7
01030500 “FLASH ROM Test Failed” Replace CPU board.
01030501
“FLASH ROM boot checksum larger than
flash”
Reburn boot kernel software into
flash memory and retest. If
failure persists, replace CPU
board.
01030502
“FLASH ROM app checksum larger than
flash”
Reburn application software into
flash memory and retest. If
failure persists, replace CPU
board.
01030503 “FLASH ROM boot checksum error”
Reburn boot kernel software into
flash memory and retest. If
failure persists, replace CPU
board.
01030504 “FLASH ROM app checksum error”
Reburn application software into
flash memory and retest. If
failure persists, replace CPU
board.
01030505 “FLASH ROM read/write memory test error” Replace CPU board.
01030600 “Power Subsystem Test Failed” Replace CPU board.
01030601 “A2D Converter failed to convert” Replace CPU board.
01030602 “Invalid Power Request” Replace CPU board.
01030603 “Temperature out of spec” Replace CPU board.
01030700 “PCI Bridge Test Failed” Replace CPU board.
01030701 “PCI Bridge configuration not recognized” Replace CPU board.
01030702 “PCI Bridge registers are not writable” Replace CPU board.
01030703 “PCI Bridge revision not valid for clinical use” Replace CPU board.
01030800 “Ethernet Test Failed” Replace CPU board.
01030801 “Ethernet Setup Failed” Replace CPU board.
01030802 “Ethernet Transmit Failed” Replace CPU board.
01030900 “ISA Bridge Test Failed” Replace CPU board.
01030A00 “Video Test Failed” Replace CPU board.
01030A01 “Invalid Display Type” Replace CPU board.
01030A02 “Invalid Display Size” Replace CPU board.
01030A03 “Video configuration not recognized” Replace CPU board.
01030A04 “Video DRAM failure” Replace CPU board.
01030A05 “Video could not detect hsync signal “ Replace CPU board.
Table 1: Diagnostic Failure Messages (continued)
Error Code Diagnostics Failure Message Suggested Action