Service manual

Maintenance
4-13
Figure 4-3: Top cover removal
7. After clearing the retaining brackets, pull the cover straight back until it clears the base and
can be removed
.
8. To install the top cover, gently push the cover forward until a firm snap is heard, indicating
that the cover has contacted the base.
CAUTION:
• When reinstalling the top cover, be careful that the beryllium/copper fingers
in the top corners are not damaged. Hold them in slightly while sliding the
top cover on.
top view
latches
top cover
removal tool
(P/N 003-0085-00)
insert tool between
bezel and top cover
as far as it can go
bezel
top cover