Service manual

Setup
2-11
Figure 2-7: Looping the audio output cable around the supplied strain relief
Ethernet LAN Cables
• Pre-molded Cables — When connecting a monitor to the wall plate or in the construction of a
central station, use cables with both ends pre-molded. These cables have ferrite beads molded
into each end for EMI compliance and are available in multiple lengths.
• Bulk Cables — If desired, cables can be constructed from bulk 500-foot (152.4 m) spools. This
type of cable construction is preferable in cases where conduit lengths are unknown.
Examples of looping the audio output cable
around the supplied strain relief.