Service manual

UCW and Ultraview 1700 Monitors — Service Manual
2-2
90387
Inspection
Prior to installation of your patient monitor, conduct an equipment audit.
Upon receipt of the equipment, a detailed inventory must be taken to verify that the equipment
received matches your order. This inventory should include serial numbers, model numbers with
options, and cables. Carefully inspect these items for shipping damage. If damage is apparent,
notify the freight company and Spacelabs Medical immediately.
The monitors are typically shipped as follows:
UCW Monitor (90385) — Contains the monitor with installed I/O and CPU printed circuit board
assemblies (PCBAs), power cord, and AC cord retainer.
Ultraview 1700 Monitor (90387) — Contains the main assembly with installed I/O and CPU
printed circuit board assemblies (PCBAs), power cord, and AC cord retainer.
External Module Housing — The 90491 four-slot housing or the 90499 two-slot housing, DC
power supply, SDLC cables, and power cord.
Accessories — Contains the power cords and cable assemblies ordered.
Mounting Hardware — All ordered mounting hardware is supplied with appropriate instruction
sheets.
Assembled weight of monitor: 9.7 lbs (4.4 kg)
Assembled weight DC power supply: 1.8 lbs (0.8 kg)
Dimensions of monitor: 10.25 (H) × 6.0 (W) × 9.5 (D) in.
(26.0 × 15.2 × 24.1 cm)
Dimensions of DC power supply: 2.1 (H) × 4.0 (W) × 6.5 (D) in.
(5.3 × 10.2 × 16.5 cm)
AC input voltage range: 100 to 120 VAC, 200 to 230 VAC
AC input current: 1.5 A (maximum)
AC input frequency range: 50 to 60 Hz
Power supply output voltage: +18 VDC
Power supply output current: 4.25 A (maximum)
Temperature (operating): +10° to 40° C (50° to 104° F)
Humidity (operating): 95% relative humidity, non-condensing
Power dissipation: 100 watts, 342 BTU/hour
!
• When removing items from the shipping container, make sure you remove ALL
components from each container.