Owner`s manual

Serial Control Specifications
Page 18 CM Labs SixtyFour Owner’s Manual
Source Levels: Note: 60 is Unity Gain, 6A is +lOdB Gain
Byte # 256 Source 1 level from 00 to 6A
Byte # 257 Source 2 level from 00 to 6A
Byte # 288 Source 32 level from 00 to 6A
...
Byte # 322 Low Nibble Patch # to send out on MIDI Channel 1
Byte # 323 High Nibble Patch # to send out on MIDI Channel 1
Byte # 324 Low Nibble Patch # to send out on MIDI Channel 2
Byte # 325 High Nibble Patch # to send out on MIDI Channel 2l
Byte # 360 Low Nibble Patch # to send out on MIDI Channel 16
Byte # 361 High Nibble Patch # to send out on MIDI Channel 16
Current audio settings: Header - 02 - CH - 00 - Body - F7 Rx, Tx
Where Body includes the some as above.
Source/Destination Labels: Header - 03 - CH - 00 - Labels - F7
Where Labels includes:
Source l 10 ASCII Characters
Source 2 10 ASCII Characters
...
Source 32 10 ASCII Characters
Destination 1 10 ASCII Characters
Destination 2 10 ASCII Characters
...
Destination 32 10 ASCII Characters
Stereo Assignments: Header- 04- CH -Stereo- F7 Rx, Tx
Where Stereo includes:
Note: Both nibbles = OF means not assigned stereo.
Byte # (Decimal)
Byte # 0 Low Nib of Source 1 Stereo Pair. 01H or 0FH, Byte # l High Nib of Source 1 Stereo Pair 00H or 0FH
Byte # 2 Low Nib of Source 2 Stereo Pair. 00H or 0FH, Byte # 3 High Nib of Source 2 Stereo Pair. 00H or 0FH
Byte # 4 Low Nib of Source 3 Stereo Pair. 03H or 0FH, Byte # 5 High Nib of Source 3 Stereo Pair. 00H or 0FH
Byte # 6 Low Nib of Source 4 Stereo Pair. 02H or 0FH, Byte # 7 High Nib of Source 4 Stereo Pair. 00H or 0FH
...
Byte # 60 Low Nib of Source 31 Stereo Pair. 0FH or 0FH, Byte # 61 High Nib of Source 31 Stereo Pair. 01H or 0FH
Byte # 62 Low Nib of Source 32 Stereo Pair. 0EH or 0FH, Byte # 63 High Nib of Source 32 Stereo Pair. 01H or 0FH
Byte # 64 Low Nib of Dest 1 Stereo Pair. 01H or 0FH, Byte # 65 High Nib of Dest 1 Stereo Pair. 00H or 0FH
Byte # 66 Low Nib of Dest 2 Stereo Pair. 00H or 0FH, Byte # 67 High Nib of Dest 2 Stereo Pair. 00H or 0FH
Byte # 68 Low Nib of Source 3 Stereo Pair. 03H or 0FH, Byte # 69 High Nib of Source 3 Stereo Pair. 00H or 0FH
Byte # 70 low Nib of Source 4 Stereo Pair. 02H or 0FH, Byte # 71 High Nib of Source 4 Stereo Pair. 00H or 0FH
...
Byte # 124 Low Nib of Dest 31 Stereo Pair. 0FH or OFF, Byte # 125 High Nib of Dest 31 Stereo Pair. 01H or 0FH
Byte # 126 Low Nib of Dest 32 Stereo Pair. 0EH or 0FH, Byte # 127 High Nib of Dest 32 Stereo Pair. 01H or 0FH
System Parameters: Header - 08 - Params - F7 Rx, Tx
Where Params includes:
Byte # 0 MIDIChannel 00-0F
Byte # 1 Lock type 0 = Off, 01= One, 02=All
Byte # 2 Autoscan time 08 (fast)- AF (slow)
Byte # 3 102 (Fixed)
Byte # 4 System Flags Bit # 0 is Master/Slave status. 0 = Master, 1 = Slave
Meter sensitivity is Bit #1. 0 = +4 dBv, 1 = -10 dBu.