Owner`s manual

Page 32 CM Labs Dashboard Owner’s Manual
Appendix A: SixtyFour Operation
To route a stereo destination, press the left channel
BURN switch. Both BURN LED’s light to show that it is
routed. Once routed, you can press either left or right
BURN switch to unroute it.
Cross-Routing Stereo
If you press the right channel BURN switch, the output
will be “cross-routed” with left going to right and right
going to left. The left channel Destination LED’s blink on
the SixtyFour to show that it is cross routed.
When the “source” LED is lit, use the channel BURN
switches to select sources for routing. If the selected
Source is Mono, the channel BURN LED will illuminate to
show that it is selected.
Surround Routing
Surround or multi channel Sources must be routed one
at a time. Each individual source driving a surround
Destination must be routed individually. This provides a
great deal of flexibility in working with multiple surround
Sources.
Level Control Operations
Setting Destination Levels
Rotate a channel rotary pot to change a Destination
level. Destination levels can be changed independently
of which source is selected and whether the Destination
has been routed or not. Stereo Destinations have their
level displayed under the left channel label and their
stereo balance displayed in the right channel. The left pot
controls the level, and the right pot controls the stereo
balance.
Setting Levels to Unity
Press and hold the CUT/default switch. Press any
channel SELECT switch, and the Destination level will
jump to unity. If the Destination is stereo, the left channel
SELECT switch will set the level to unity, and the right
SELECT switch will set balance to center.
Setting Levels to Off
Press and hold the ALT switch and then press any
channel SELECT switch, and the Destination level will
jump to off. If the Destination is stereo, the left channel
SELECT switch will set the level to off, and the right
SELECT switch will set balance to center.
Surround Level Control
You can control the overall Surround level by rotating
any channel pot that is in a Surround or multi channel
destination.
To change individual Surround levels, press and hold the
CTRL switch and then rotate a pot. The level of that
channel will change independently of the other levels.
Setting Surround Levels to Unity
When the “destin” LED is lit, press and hold the SHIFT
switch (or double click it) and then press and hold the
CUT/default switch. Press any channel SELECT switch,
and the Surround Destination level will jump to unity.
Setting Surround Levels to Off
When the “destin” LED is lit, press and hold the ALT
switch and then press and hold the CUT/default switch.
Press any channel SELECT switch, and the Surround
Destination levels will jump to off.
The Dashboard Surround Monitor Mode also provides
overall Surround level control without having to select
the SixtyFour from the Burn Mode switch.