Owner`s manual

Upper Panel Controls
Page 14 CM Labs Dashboard Owner’s Manual
Query Groups.
To show the Group ID, press and hold down the SHIFT
switch first and then the GROUP switch, and the group
ID will be displayed on the bottom row of the LCD.
The Rotary Pot Section includes the 8 endless rotary
pots , the Rotary Selector (with push switch) just to the
right of the 8 rotaries, and the Rotary Display. This is a 2
digit 7 Segment LED character display. This section also
includes the 4 Rotary Mode switches and 8 Rotary Mode
LED’s, and on the 8 MULTI switches just below the
rotary pots.
MULTI Switches.
In MIX mode (fader or pan) or MONITOR (stereo or
surround), the MULTI switches below the pots activate
the functions labelled below them.
The left most 5 switches are the audition switches. These
are labelled “aud” (audition), “pre” (pre roll), “in” (edit
selection start), “out” (edit selection end), and “post” (post
roll).
Press the “aud” switch and the led will light.
Press the “pre” switch to play from the pre-roll point to
the start of the edit selection. This mimics the option -
left arrow on the keyboard.
Press the “in” switch to play from the start of the edit
selection and play the length of the pre-roll. This mimics
the command - left arrow on the keyboard.
Rotary Pots and Controls
Rotary Mode Display
Rotary Selector
Rotary Mode Switches
MULTI Switches (8)
Rotary Pots (8)
Rotary Mode LED’s (8)
Press the “out” switch to play from the end of the edit
selection and play the length of the post-roll. This mimics
the option - right arrow on the keyboard.
Press the “post” switch to play from the end of the edit
selection and play the length of the pre-roll. This mimics
the command - right arrow on the keyboard.
If you press the “in” or “out” switch while playing, enters
the selection in and out points on the fly.
Press and hold ALT and OPT together and then press
“pre” or “in” and play will go from the pre-roll point
through the edit selection and end after the post-roll time.
This mimics the command - option - left arrow on the
keyboard.
Press and hold ALT and OPT together and then press
“out” or “post” and play will go from before the edit
selection end by the pre-roll amount through the edit
selection and end after the post-roll time. This mimics
the command - option - right arrow on the keyboard.
When audition is active, you can press any of the other
audition switches and instantly go from auditioning one
selection to another.