Owner`s manual

LCD Display and channel SELECT Switches
LCD Top Row
Top Row Use for DAW Application
1.) A shortened version (4 characters) of your channel
labels.
2.) Plug-in switch parameter names and states (text).
3.) Special uses of channel SELECT switches.
4.) Menu pop ups from the computer.
5.) Input/Output and Send Buss Assignments.
Top Row Use for CM Labs SixtyFour studio router
1.) A shortened version (4 characters) of the source and
destination labels you entered into the SixtyFour from
MotorMate.
2.) The current SixtyFour memory name you entered into
the SixtyFour from MotorMate.
Top Row Use for Surround Monitoring
1.) “*Master* *Center* *Surround* *Sub* “ speaker
labels.
2.) “Left&Rght *Center* *Surround* *Sub* “ speaker
offsets (when the View Stick is pushed).
Top Row Use for CM Labs MP-8 Mic Preamp
1.) A shortened version (4 characters) of the mic preamp
labels you entered into the MP-8 from MotorMate.
Using the View Stick and the Zoom Stick
View Stick Zoom Stick
These sticks have 5 “directions of motion” and you can
move them left, right, up, down and in. It is important
where you place your finger to operate them and how you
make your movements to achieve the greatest degree of
control. For horizontal and vertical movements, touch the
black arrows around the side of the stick, and move your
finger sideways or up/down. To push in the View Stick,
place your finger on the tip and press in.
LCD Bottom Row
Bottom Row Use for DAW Application
1.) Channel pan (or pan right for stereo channels) posi-
tion (graphically).
2.) Channel send level (graphically).
3.) Channel send pre/post state (text).
4.) Send buss assignment.
5.) Plug-in continuous parameter names (text) and
settings (numeric).
6.) Channel automation mode (text).
7.) Group ID.
8.) Channel input/output assignment.
Bottom Row Use for Surround Monitoring
1.) Overall surround speaker level (text).
2.) L*R speaker offset level (text).
3.) Center speaker offset level (text).
4.) L*R surround speaker offset level (text)
5.) Subwoofer speaker offset levels (text).
Bottom Row Use for CM Labs SixtyFour studio router
1.) Source and destination levels in dB (text).
Bottom Row Use for CM Labs MP-8 Mic Preamp
1.) Mic preamp gain setting in dB (text).
Mixer Controls
Page 12 CM Labs MotorMate Owner’s Manual
LCD Display
SELECT switches
RIGHT
LEFT
DOWN
IN
UP