Specifications

Chapter 4: JL Cooper CS-10 MIDI Control Surface 71
Scrolling the Edit and Mix
Windows
To scroll the Edit or Mix window:
■ Hold down the COMMAND switch, and press
an arrow key on any hardware control surface to
scroll the frontmost window one page in the in-
dicated direction.
To scroll to the session start or end:
■ COMMAND+OPTION+Left Arrow scrolls to
session start; COMMAND+OPTION+Right Ar-
row scrolls to session end.
Scrub and Shuttle Wheel
With the CS-10 Scrub/Shuttle wheel, Pro Tools
scrubs the current edit cursor position on the se-
lected track or track pair.
If you are using a multiple track edit group,
Pro Tools will scrub or shuttle the topmost track
pair in the selected edit group (leftmost in the
Mix window). To scrub or shuttle other tracks in
an edit group, first disable the group (or use the
Suspend Groups command), and position the
edit cursor over the track or track pair before en-
tering Scrub/Shuttle modes.
While in Scrub/Shuttle mode, all other screen
activity is locked out, and the Edit Window sta-
tus display area indicates “Scrub” or “Shuttle.”
Shortcuts
◆ Scrub switch located to the left of the
Scrub/Shuttle wheel: toggles Scrub mode on or
off.
◆ Shuttle switch located to the right of the
Scrub/Shuttle wheel: toggles Shuttle mode on or
off.
◆ Press the Transport’s Stop button to exit Scrub
or Shuttle mode.
◆ Hold down the COMMAND switch (F7) to
scrub at a fixed fine resolution, regardless of the
current zoom settings.
◆ Hold down the SHIFT switch to make a new
selection while scrubbing or shuttling; Release
the SHIFT switch to finish the selection.
◆ Hold down the OPTION switch to begin
scrubbing or shuttling from the end of a selec-
tion.
Creating Selections Using the
Scrub/Shuttle Wheel
You can create and modify on-screen selections
using the Scrub/Shuttle wheel:
To create selections using the Scrub/Shuttle
wheel:
■ Press the Scrub or Shuttle switch on the CS-10.
The start position will be the current selection’s
start point, or current cursor position if there is
no selection.
■ To Scrub or Shuttle from the selection end
point, press the Scrub or Shuttle switch while
pressing the OPTION switch.
■ You can navigate to the start or end of your se-
lection at any time by pressing the Left or Right
Arrow keys.