Specifications

MIDI Control Surfaces Guide68
Fader Switch Status LEDs
Since the CS-10 was designed, some newer
modes for the switches above the faders have
been added to the MIDI Control Surface Person-
ality file for the CS-10. These modes use status
LEDs to indicate the current function for the
row of switches. The status LEDs are next to the
Master Status button.
◆ Track Record-Enable mode is indicated when
both Solo and Select LEDs (the top and bottom
status LEDs respectively) are lit.
◆ When Target Channel Strip mode is enabled,
all four LEDs will be lit. In this mode, you can
use the Target Channel Strip switch to choose
which channel strip in a bank is affected when
the pan and five sends knobs are moved. The
target channel strip is indicated by a red outline
around the channel strip name.
Vertical Null LEDs
The position of the CS-10’s faders may not cor-
respond with Pro Tool’s on-screen fader posi-
tions. When you move a fader, it will not actu-
ally affect the volume control until the fader has
passed through the on-screen position, or null
point. The vertical null LEDs on the CS-10 indi-
cate which direction the last touched fader must
be moved in order to pass through the null. Al-
ternatively, you can also watch the on-screen
AutoMatch indicators.
Additional Switch Functions
Switch Function
F1 Sets selection start point
F2 Sets selection end point
F3 Capture region or regions
F4 Separate region or regions
F5 Option key
F6 Control key
F7 Command key
F8 Cycles through selection
of Edit tools
F9 Toggles Online or Offline status
Left Arrow Bank swaps channel strips
to the left
Right Arrow Bank swaps channel strips
to the right
OPTION+
Left Arrow
Scrolls bank to the left by
a single channel strip
OPTION+
Right Arrow
Scrolls bank to the right by
a single channel strip
SHIFT+
Left Arrow
Zooms out horizontal view
(time axis)
SHIFT+
Right Arrow
Zooms in horizontal view
(time axis)