Specifications

Chapter 4: JL Cooper CS-10 MIDI Control Surface 67
chapter 4
JL Cooper CS-10 MIDI Control Surface
The JL Cooper CS-10 and CS-10
2
units are eight-
fader control surfaces. The CS-10
2
can also ac-
commodate up to seven CS-10
x
expander mod-
ules (each containing eight faders) for a total of
64 faders. Pro Tools supports a maximum of 32
faders using an expanded CS-10
2
and CS-10
x
configuration. The maximum configuration
would be a single CS-10
2
and three CS-10
x
units.
Fader Switch Functions
The switches that appear directly above the
fader strips control one of the following modes:
Solo Changes the solo state of tracks.
Mute Changes mute state of tracks.
Memory Location Recalls or sets Memory Loca-
tions.
Track Selection Selects tracks on-screen for edit-
ing and other procedures.
Track Record Arming Changes record status of
tracks.
Target Channel Strip Assigns a Target Track for
setting pan and send routing.
When the fader switches control mutes, any
track that is currently muted as a result of an-
other track being soloed will have its associated
switch LED flash.
To cycle through the different switch modes:
■ Press the Master Status button (located di-
rectly above the vertical nulling LEDs).
– or –
■ While pressing the OPTION switch (F5), press
the Master Status button to cycle through the
switch modes in reverse.
While Pro Tools supports a maximum of 32
faders with these units, you can use the Left
and Right Arrows on the CS-10
2
or CS-10
x
to easily bank swap the faders to control an
entirely different set of tracks.