Specifications

Chapter 3: Mackie HUI Control Surface 57
DEFAULT Switch
QuickMode
This switch returns a channel strip’s faders and
V-POTS to their default settings. The default set-
tings for fader position is “0” (or unity) gain; for
pan, the default is centered.
The DEFAULT switch obeys grouped behavior.
To temporarily disable grouped behavior, press
CTRL/CLUTCH while pressing DEFAULT, or sus-
pend groups.
To return a channel strip fader to its default
setting:
■ Press DEFAULT+ the channel strip’s SELECT
switch.
To return all channel strip faders to their default
settings:
■ Press OPTION/ALL+DEFAULT+ any channel
strip’s SELECT switch.
To return all selected channel strip faders to their
default settings:
■ Press OPTION/ALL+SHIFT/ADD+DEFAULT+
any selected channel strip’s SELECT switch.
To return a channel strip’s send level or pan to its
default setting:
1 Press a SEND (A–E) or PAN switch in the Se-
lect/Assign section.
2 Press DEFAULT+ any channel strip’s V-SEL
switch.
To return all channel strip send levels or pans to
their default settings:
■ Press OPTION/ALL+DEFAULT+ any channel
strip’s V-SEL switch.
To return all selected channel strip send levels or
pans to their default settings:
■ Press OPTION/ALL+SHIFT/ADD+DEFAULT+
any selected channel strip’s V-SEL switch.
To return a Plug-In to its default setting:
■ Press DEFAULT+ the COMPARE switch in the
DSP EDIT/ASSIGN area.
The plug-in returns to either the Factory Setting
or the User Setting default, depending upon
which is selected in the “Settings Preference” in
the Plug-In Librarian pop-up menu.
Working with Plug-Ins: Using
the DSP Edit/Assign Section
This section is used to assign plug-ins and Hard-
ware I/O inserts, and to edit plug-in parameters.
DEFAULT
SELECT
SELECT
SELECT
SCROLL
DSP EDIT/ASSIGN
INSERT
PARAM
SELECT SELECT
COMPARE
ASSIGN
BYPASS