Specifications

MIDI Control Surfaces Guide54
About I/O and SampleCell Labels
Instead of using the default I/O Label names for
your audio inputs, outputs, busses, or Sample-
Cell II cards, you can change them in Pro Tools
to 4 character names that work better on the
HUI. The I/O labels that you create in Pro Tools
are mirrored in the HUI display.
You can also save these names as your default la-
bels by clicking the Save As Default button in
the Pro Tools I/O Labels dialog.
Pre-Fader or Post-Fader Switching
for Sends
The V-POT V-SEL switch acts as a pre/post
switch for the currently active send. As pre/post
status is toggled, the channel’s scribble strip in-
dicate “PRE” or “POST” (as long as the V-SEL
switch is held down). Newly-created sends de-
fault to post-fader (V-SEL switch LED is turned
off).
This functionality is available while in Flip
mode. Pre/post switching is not available when
HUI is in Assign mode, or if the master MUTE
switch is operating on the V-SEL switches, or
while Pro Tools is playing or recording.
◆ To toggle a send pre-fader or post-fader, press
the V-SEL switch on its channel.
◆ To toggle a send pre-fader or post-fader for all
channels, press OPTION/ALL+V-SEL.
◆ To toggle a send pre-fader or post-fader for all
selected channels, press OP-
TION/ALL+SHIFT/ADD+V-SEL.
Selecting and Editing Inserts
and Plug-Ins
There are three methods for selecting plug-in or
Hardware I/O inserts for editing: using the IN-
SERT switch with the DSP Edit/Assign display,
using the INSERT switch with the SEND A–E
switches, and by double-clicking the INSERT
switch.
Selecting an Insert Using the DSP
Edit/Assign section
In this method, the INSERT switch is used to be-
gin the process, but the plug-in is selected in the
DSP Edit/Assign section.
To select an insert using the DSP Edit/Assign
display section menu:
1 Press a channel strip INSERT switch.
2 The names of the first four inserts for that
channel appear in the DSP Edit/Assign display
area. To access Insert #5, turn the SCROLL pot to
go to the next page of inserts. The name of the
last insert accessed during the current session
flashes in the display. If no insert was accessed in
the session, Insert #1 flashes.
3 To select a particular insert for editing, press
the SELECT switch under an insert listed in the
display.
4 If the insert is the currently flashing item in
the display, double-click the channel’s INSERT
switch, or press the DSP Edit/Assign section’s IN-
SERT/PARAM switch to confirm the choice. To
select an insert other than the currently flashing
item, press the SELECT switch under the insert
listed in the display.
Refer to the Pro Tools Reference Guide for
details on creating custom I/O Labels in
Pro Tools.