Specifications

MIDI Control Surfaces Guide52
MONITOR Switch
Press the MONITOR switch to display monitor
assignment on the channel scribble strips. Mon-
itor mode is changed in the Pro Tools Opera-
tions menu.
To view the Monitor status of the current bank:
■ Press the MONITOR switch. The current mon-
itor status of channels is displayed:
• Auto: Auto Input mode
• Inpt: Input Only mode
• Aux: Channel is an Auxiliary Input
• MIDI: Channel is a MIDI track
• Mstr: Channel is a Master Fader
Working with Groups
In addition to viewing channel status, you can
create, enable, and suspend groups from the
switch matrix.
To create a group:
1 Select two or more channels by pressing
SHIFT/ADD+ the SELECT switches on the chan-
nels.
2 In the STATUS/GROUP switch matrix, press
CREATE. The next available default group name
is indicated.
3 Do one of the following:
◆ Press ENTER on the HUI Numeric Keypad to
accept the default group name and ID.
◆ Type a name, select a different Group ID, or
overwrite an existing group definition, and
press ENTER.
SUSPEND Switch
Suspend Groups
All Mix groups can be temporarily suspended by
pressing SUSPEND in the Status/Group section.
Pressing this switch again returns to the previ-
ous Group status. When SUSPEND is enabled,
the SUSPEND switch LED flashes. When SUS-
PEND is disabled, the LED turns off.
The SUSPEND switch LED mirrors the state of
the Mix groups, but ignores Edit groups.
Select/Assign section
Pan, Input/Output, Sends
The V-POT encoder function for active channels
is assigned from the SELECT/ASSIGN switch sec-
tion. You can also change send or I/O destina-
tions from this section. I/O destinations for in-
dividual channels can be shown in the
SELECT/ASSIGN LED. Only one of the SE-
LECT/ASSIGN switches can be active at a time.
CHANNEL
BANK
SEND B
SEND C
SEND D
SEND E
PAN
SEND A
REC/RDY ALL
BYPASS
MUTE
SHIFT
ASSIGN
DEFAULT
OUTPUT
INPUT
SUSPEND
SELECT-ASSIGN
ASSIGN