Specifications

Chapter 3: Mackie HUI Control Surface 51
Adjusting Channel Pan
To edit pan positions on channels:
1 Press the PAN switch in the Select/Assign sec-
tion.
2 When the PAN switch is first enabled, a stereo
channel’s V-POT defaults to control the left
channel pan (or the single pan control on mono
channels). The SELECT/ASSIGN LED displays
“Pan.”
3 On stereo channels, press the PAN switch a
second time to edit the right channel pan. The
SELECT/ASSIGN LED displays “PanR,” and the
PAN switch LED flashes.
The V-POT LED collar indicates pan position
with a single LED. The 6 o’clock LED in the col-
lar of the V-POT encoder lights when the pan
setting is centered. If there is no pan associated
with a channel (such as a Master Fader), none of
the collar LEDs on its V-POT will light.
The rotary encoders on the HUI channel strips
(which are used for adjusting send levels and
pan controls) are not velocity sensitive; they op-
erate in fixed mode only.
STATUS/GROUP Switches
These switches are used to show and change
group status and carry out grouping functions,
using the channel scribble strips.
AUTO and GROUP Switches
The AUTO and GROUP switches allow you to
show the current automation mode or grouping
status of a bank of channels.
To view the Automation status of the current
channel bank:
■ Press the AUTO switch. The channel LED
scribble strips display the automation mode for
each channel.
To view the Group status of the current channel
bank:
■ Press the GROUP switch. The channel LED
scribble strips display the Group ID letter. A low-
ercase letter indicates the channel is a member
of one group; an uppercase letter indicates the
channel is a member of multiple groups, with
the topmost group ID displayed.
PHASE Switch
Functionality for the PHASE switch has not been
implemented.
See “Rotary Knob Settings” on page 58 for
more details regarding velocity-sensitive
features of the V-POTs.
AUTO
PHASE SUSPEND
MONITOR
CREATE
GROUP
STATUS/GROUP