Specifications

Chapter 3: Mackie HUI Control Surface 49
SUSPEND Switch
The SUSPEND switch in the Select/Assign sec-
tion globally suspends all automation recording
and playback. When automation is suspended,
the SUSPEND switch LED flashes.
To suspend automation, the Pro Tools transport
must be stopped.
INSERT Switch
You can execute the following functions with
the INSERT switch:
To edit a single Plug-In:
■ Press the INSERT switch on the corresponding
channel to show it in the DSP Edit/Assign dis-
play. In this mode, only one insert may be ac-
cessed at a time.
To bypass or enable all Plug-Ins on all inserts for a
channel:
■ Enable the Master BYPASS switch (so its LED is
lit) and press the INSERT switch on that chan-
nel.
To bypass Plug-Ins on all channels:
■ Enable the Master BYPASS switch (so its LED is
lit), and press OPTION/ALL+ the INSERT switch
on any channel.
Master BYPASS Switch
The Master BYPASS switch in the Select/Assign
section globally changes the INSERT switches
into BYPASS switches for all plug-ins on a chan-
nel, allowing you to bypass all plug-in inserts for
the selected channel in a single operation.
To bypass all Plug-In inserts on a channel:
1 Press the master BYPASS switch in the Se-
lect/Assign section (not the DSP Edit/Assign sec-
tion). Its LED lights to indicate master bypass
mode is enabled.
2 In Master Bypass mode, the INSERT switch for
each channel in the current bank displays one
of three bypass states:
INSERT switch LED is unlit None of the plug-in
inserts on the channel are currently bypassed.
INSERT switch LED is lit All of the plug-in in-
serts on the channel are bypassed.
INSERT switch LED flashes Some but not all of
the plug-in inserts on the channel are bypassed.
3 Do one of the following:
◆ To toggle the bypass status on or off for all
plug-in inserts on a channel, press any INSERT
switch on that channel.
SUSPEND
INSERT
You cannot bypass Hardware I/O inserts
from Pro Tools. To monitor playback with-
out a hardware insert, either set the Insert
Type Selector to “No Insert” or use a bypass
switch on the hardware device itself.
BYPASS